Description
Detektor cacat pemindai ultrasonik tanpa kontak А2075 SoNet dapat digunakan untuk pencarian cacat otomatis pada dinding pipa logam berdiameter 1020 ÷ 1420 mm dan dengan ketebalan mulai dari 6mm.
Prinsip operasi pemindai-cacat detektor adalah teknik pemeriksaan gema gema pulsa terpandu gelombang eksitasi (pengiriman) dan penerimaan gelombang ultrasonik dalam tubuh pipa dibuat tanpa kontak (tanpa menggunakan couplant) dengan bantuan transduser elektro-magnetik akustik (EMA).
Deteksi cacat korosi tegangan dan korosi pada badan pipa. Deteksi cacat pada flat (produk lembaran) dengan indikasi jumlah cacat, dimensi relatif dan lokasi (koordinat).
Koneksi Wi-Fi antara PC dan detektor cacat pemindai memberikan mobilitas yang tinggi dan kemungkinan bagi operator untuk melakukan pengujian dari jarak jauh.
Gambar bagian pipa dibuat tepat selama pemindaian yang membantu memperkirakan cacat yang ditemukan dan membantu memutuskan apakah pemeriksaan tambahan dengan metode NDT lainnya diperlukan.
Melanjutkan dokumentasi hasil sebagai gambar pemindaian pipa.
Peninjauan gambar pemindaian yang terkumpul secara efisien di layar Notebook.
Pasca-pemrosesan gambar pemindaian bersama dengan pencatatan lokasi, orientasi, dan jenis cacat.
Waktu yang diperlukan untuk menyiapkan instrumen dan memulai pemeriksaan hanya 3 menit.
Kemungkinan untuk mengunggah data dari pemeriksaan intratubal dan melampirkannya ke laporan utama.
Struktur blok instrumen memungkinkan untuk segera mengganti blok yang rusak di tempat oleh hanya satu operator.
Portabilitas – pemindai – detektor cacat dapat dibawa oleh 2 orang dan dapat dioperasikan oleh 1 pengguna.
APPLICATION
Mainly the instrument is used as a part of flaw detection sets. Such flaw detection sets are used for searching flaws in gas pipelines, oil pipelines and products pipe line during major repairs or during the construction process.
Scanner-flaw detector А2075 SoNet is able to successfully detect both types of flaws: stress-corrosion flaws and other surface or internal flaws of the pipe.
The inspection is conducted by an inline automatic moving of the inspecting part of a flaw detector along generatrix on the external surface of a pipe. During the inspection full circle flaw detection is held. An image of a pipe section is made right during the scanning that helps to estimate the flaws found, to plot the coordinates, to estimate their type and shape, using standard tools of nondestructive testing.
Productivity – up to 7 meters of pipe per minute.
High sensitivity – detection stress-corrosion flaws and corrosion from 1mm.
Scanner flaw-detection is able to work on the pipe that has been earlier shelled from the old isolation. The scanner ensures 100% recurrence of the data.
SPECIFICATION
| Velocity | 3020 m/s |
|---|---|
| Operating frequency | 0.5 MHz |
| Range of the calibrated amplifier | 0-40 dB |
| Limit of the acceptable basic absolute accuracy in measuring of the coordinates of the flaws along the circumference of the pipe, not more than | ±100 mm |
| Limit of the acceptable basic absolute accuracy in measuring of the coordinates of the flaws towards the pipe, not more than | ±20 mm |
| Maximum sensitivity of the receiver, not less than | 20 mKV |
| Measurement accuracy of the amplitude ratio of signals at the receiver input, not more than | ±1 dB |
| Power | Accumulator blocks |
| Voltage | 12 V |
| Operating time (accumulator) | 8 h |
| Weight | 42 kg |
| Average error-free running time | 30000 hours |
| Average lifetime, not less than | 4 years |
| Operation conditions: air temperature | from -40 to +50°C |
| relative air humidity at a temperature of +35 °С, not more than | 95% |
| Dimensions | 407 х 655 х 407 mm |
DELIVERY KIT
• PC-Panasonic Toughbook CF-U1
• Charging unit with cable for PC
• Receiver-transmitter unit (RTU)
• Transfer platform
• Block of the electro-magnetic acoustic transducer
• Transportation packing for scanning device
• Transportation packing for RTU, PC and spare parts
• Passport (can be sent by e-mail)
• Operation manual (can be sent by e-mail)
• The standard (technique) of ultrasonic testing of a pipe’s
base metal with the non-contact ultrasonic scanner-flaw detector A2075 SoNet (can be sent by e-mail)
• CD with the documents and Software( items can be sent by e-mail)
LIST OF SPARE PART AND TOOLS
• Inductor of the electro-magnetic acoustic transducer (3 items)
• General-purpose tester
• Cross screwdriver
• Flat-blade screwdriver
• Set of allen keys
• Allen key for the encoder
ADDITIONALLY
• Charging unit with cable for accumulator unit of (RTU)
• Accumulator for PC
• Field magnet of the electro-magnetic acoustic transducer
Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com
Reviews
There are no reviews yet.