Sensor Ketinggian Air Submersible Liquid Level Transmitter Submersible Water Level Sensor RKL-01

Description

RKL-01 Pemancar Level Cairan Submersible adalah dengan tubuh inti tekanan silikon difusi diafragma isolasi stainless steel, tubuh inti tekanan mengadopsi proses pemangkasan laser resistor untuk kisaran suhu yang luas dari nol dan kompensasi suhu sensitivitas. Kabel khusus untuk saluran ventilasi udara dan teknologi kedap air memastikan kedap air, dan ventilasi antara bagian dalam dan luar, sehingga memperoleh data pengukuran yang akurat dan stabil. Sensor ketinggian air submersible dirancang untuk memberikan pengukuran ketinggian air yang sangat akurat. Sensor ini mampu memberikan data waktu nyata tentang ketinggian air, yang dapat digunakan untuk memantau penggunaan air dan mendeteksi perubahan ketinggian air. Sensor level submersible dibuat untuk tahan terhadap lingkungan yang keras, termasuk paparan air, bahan kimia, dan suhu ekstrem. Sensor ini dirancang untuk bertahan selama bertahun-tahun, bahkan dalam kondisi yang keras.

Item	Technical specifications
Range	0 ~ 0.5m…200mH2O or 0 ~ 5KPa…2MPa
Output	4-20mA,0-5V,0-10V,RS485
Supply Voltage	10-30VDC,24V typ.
Over Pressure	2×FS
Measuring Medium	The liquid(not sticky ) compatible with 316 stainless steel
Total Accuracy	0.1%FS,0.3%FS(0.25%FS),0.5%FS
Long-term Stability	0.1%FS/year typ.,0.2%FS/year max.
Ingress Protection	IP68
Operating Temperature	-40℃~ +80℃
Compensating Temperature	-10℃~ 70℃
Temperature Drifting	0.03%FS/℃ typ.,0.05%FS/℃
Cycle Life	1*10^8 @25℃
Main Material	Sensor:316L,housing:304SS(316L is optional)
Cable	Outer material：PUR,Atmospheric pressure compensation cable, Polymer waterproof plug at cable end
Power Consumption	Current output:(U*0.02)W, Voltage output:(U*0.008)W, Digital output:(U*0.015)W
Load Capacity	Current output:≤(U-7)/0.02Ω, Voltage output:≥100kΩ
Weight(probe unpacked)	Approx. 230g
Storage Condition	10℃-50℃@20%-90%RH

DIMENSION & FIXED BRACKET(OPTIONAL)

Unit:MM

Fixed Bracket (Opsional)

MOUNTING

As shown in picture 1, when the submersible level sensor is installed in static water such as in poos, water towers, probe is immersed into the bottom and should be as far as possible away from the pump or valves. The terminal box should keep above water surface and prevent water penetrating into cables.Please make sure the airway not be blocked;As shown in picture 2, when the submersible water level sensor is installed in dynamic water such as dams or rivers, the probe should be inserted into a steel pipe(inner dia is around 45mm), burrowing several holes at a different height on the pipe side wall which is opposite to the water flow direction. The terminal box should keep above the water surface and prevent water from penetrating cables. Please make sure the airway not be blocked.

PRODUCT DETAILS

Details on the submersible level sensor (material, inner part, accuracy, PUR cable details, waterproof standard)