Lima inklinometer dipasang pada pohon yang sama untuk melihat apakah posisinya memengaruhi pengukuran keselamatan

Anemometer diatur pada ketinggian 4, 5 dan 10 meter untuk menguji seberapa besar perubahan keamanan

Jendela evaluasi di DynaRoot menunjukkan rinciannya.

Anemometer diatur pada ketinggian 4, 5, dan 10 m, dan kelima inklinometer tersebut mengumpulkan data. Faktor Keamanan menurun secara signifikan.

 At present, the most accepted method for evaluating the safety and stability of tree roots

Applying a bending load on the trunk via a cable attached to the tree

 Assess the uprooting stability of the tree Or to establish the risk of trunk breakage.

• Make sure you follow all the safety instructions throughout the test!

• Start measurement by loading the cable slowly and evenly using the winch.

• Attach the cable to the trunk in the crown of the tree, as high as possible.

• Choose an anchor point in the appropriate direction, about 10 to 15 m from the tree.

• Set up the winch and ropes according to the guide.

• Install the load cell.

• Install the inclinometer sensors.

• Install the extensiometer sensors.

• Connect all sensors to the central unit.

• Switch on the units, and press “Tara” on the load cell.

• Start the Pulling Test software.

Pulling test – inclino

• Inclinometer (1 or 2 pcs.)
• Base plate with ball head
• Battery box, 9V rechargeable battery
• Battery charger
• Central unit
• Force meter and display
• Serial cables connecting sensors and central unit
• Software on CD
• User’s manual
• Pulling device (optional)

Pulling test – elasto (extension package)

• Serial cables connecting dual elastometer box and central unit

• 2 elastometers in quick mounting house

• Dual elastometer box

• Screw and screwdriver

• Batteries and battery charger