Description
Detektor cacat ultrasonik serba guna ukuran kecil yang portabel. Alat ini mewujudkan metode pemeriksaan ultrasonik standar dan tujuan khusus yang memberikan efisiensi dan akurasi pengukuran yang tinggi.
Semua fitur detektor cacat terkini dalam wadah yang ringkas. Ideal untuk bekerja di tempat yang sulit dijangkau. Dapat digunakan dalam kondisi sempit dan sulit berkat bobot yang ringan dan ukurannya yang kecil. Praktis untuk dibawa bepergian.
Casing ergonomis dari plastik tahan guncangan – perangkat dapat dipegang dengan satu tangan. Layar warna kontras tinggi yang besar dengan resolusi tinggi (640*480 piksel) memungkinkan Anda untuk bekerja dalam waktu yang lama tanpa melelahkan mata.
Komentar suara dapat ditambahkan ke gambar yang disimpan dengan bantuan set Bluetooth bebas.
Unit elektronik dapat dipasang pada bantalan khusus agar kedua tangan bebas dan bekerja dengan nyaman di tempat yang sulit dijangkau dan di ketinggian.
Penutup lembut khusus dengan tudung matahari melindungi unit elektronik dari kotoran, air dan debu serta dari cahaya eksternal dan sinar matahari.
APPLICATION
Weld joints inspection.
Locating corrosion, cracks, internal stratifications and other flaws.
locating and sizing up flaws (discontinuities and inhomogeneities) in metal and plastic objects.
Thickness measurement.
Digital TCG allows to modify the signal, basing on an arbitrary function set up by 32 node points. Mode points are set up, modified and deleted at a special TCG editing mode. Setup of TCG is performed to get pulses of equal height from equal reflectors providing correct sizing of flaws through the whole thickness of the object of inspection.
DGS-diagrams for single-crystal transducers show three curves on the screen, representing the acceptance, reporting and examination levels. The equivalent area of discontinuity is evaluated automatically.
With feature you avoid manual evaluations of flaw area to increase the testing efficiency significantly.
DAC-curves show three curves on the screen, representing the acceptance, reporting and examination levels. This allows you correctly estimate the validity of the detected defects, according to the current normative and methods of ultrasonic testing.
SPECIFICATION
| Maximum thickness of the tested object (echo method, steel) | 3000 mm |
|---|---|
| Rated operating frequencies | 0,5 – 15,0 MHz |
| Material ultrasound velocity setting range | 1 000 – 14 999 m/s |
| Operating frequencies deviation from rated | ± 10% |
| Inspection range with the normal beam transducers:
S3568 2.5A0D10CL D1771 4.0A0D12CL |
7 to 6.000 mm 2 to 3.000 mm |
| Permissible basic measurement accuracy for thickness D with a normal transducer | ±(0,01D+0,2) mm |
| Measurement accuracy for depth defect H with a normal transducer | ±(0,01H+0,2) mm |
| Flaw coordinate measuring range (on steel) with an angled transducer 60° depth H | 3 – 1300 mm |
| Permissible basic flaw coordinate measuring accuracy with an angled transducer 65° depth H | ±(0,03H+1) mm |
| Flaw coordinate measuring range (on steel) with an angled transducer 70° depth H | 3 – 500 mm |
| Permissible basic flaw coordinate measuring accuracy with an angled transducer 70° depth H | ±(0,03H+1) mm |
| distance on surface L | ±(0,03L+1) mm |
| Gain regulation range | from 0 to 100 dB |
| Dynamic TGS range, not less than | 20 dB |
| Rated battery voltage | 11,1 V |
| Operating time at normal weather conditions, not less than | 8 h |
| Operating temperature range | from -30 to +55ºC |
| Display type | color TFT |
| Display resolution | 640 х 480 pixels |
| Electronic unit size | 260 х 156 х 43 mm |
| Weight with batteries | 800 g |
DELIVERY KIT
• A1212 MASTER – ultrasonic flaw detector
• D1771 4.0A0D12CL transducer
• S3568 2.5A0D10CL transducer
• S5182 2.5А45D12CS transducer
• S5096 5.0А45D6CS transducer
• LEMO 00 – LEMO 00 double cable,1,2 m
• LEMO 00 – LEMO 00 single cable,1,2 m
• Network adapter, cable
• USB cable
• Calibrating sample V2/25
• Soft cover
• Carrying map case
• Bag
Reviews
There are no reviews yet.