Alat Uji Paku Panas Hot Tack Tester HTT-01

Description

HTT- 01 Hot tack tester berlaku dalam uji properti paku panas untuk film plastik, film laminasi dan film kemasan lainnya. Sementara itu, ini berlaku untuk kulit, geser, tegangan dan benda uji lainnya untuk perekat, pita perekat, film laminasi, film plastik, kertas dan bahan fleksibel lainnya.

CHARACTERISTICS

* Micro-computer control, digital display, PVC operation board;

* 4 testing functions of hot tack, hot seal, peeling and tensile resistance;

* Digital P.I.D temperature control system;

* 4 force testing range;

* 6 testing speeds;

* Two start modes of manual and foot pedal;

* Automatic zero, error alert, overload protection and stroke protection.

* RS232 port;

TECHNICAL INDEXES

Seal Temperature: room temperature~250ºC

Temp. Control Accuracy: ±0.2ºC

Dwell Pressure: 0.05MPa~0.7MPa

Dwell Time: 0.1s~999.9s

Delay Time: 0.1s~999.9s

Load Cell Range: 0-200N (optional: 30N 50N 100N)

Accuracy: ±1% of reading force

Resolution: 0.01 N

Test Speed: 100  150  200  300  500 and Hot Tack  (mm/min)

Heat Type: single heating or double heating (also made to order)

Specimen Width:15mm,25.4 mm. Or25 mm(Optional, also made to order)

Stroke:500 mm

Gas Source Pressure: 0.05MPa ~ 0.7MPa (Users provide gas sources themselves)

Power: AC 220V 50Hz

Net weight:45kg

STANDARDS

• ASTM F1921, ASTM F2029

CONFIGURATION

Standard: Mainframe, footswitch, hot tack clamp, calibration frame

Optional: software, communication cable, non-standard seal jaws, test board, Welding Cloak,

non-standard jaws, sample cutter, non-standard specimen fixture

Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com