Alat Simulasi Uji Getaran Suhu Dan Kelembaban Tinggi ( High Temperature And Humidity Vibration Test Bench ) HD-E809

Description

Fitur

1. Gerakan naik dan turun peralatan diwujudkan melalui mekanisme pengangkatan

2. Penyegelan koneksi antara dasar ruang dan permukaan meja getaran, koneksi antarmuka antara kotak uji dan permukaan meja getaran diproses menjadi bentuk bellow persegi dengan bahan komposit organik tahan suhu tinggi dan rendah

3. Pelat penyegelan konfigurasi peralatan, koneksi cepat

4. Memiliki kekuatan tinggi, fleksibilitas tinggi, penyegelan tinggi, kinerja insulasi termal tinggi, dan dapat menahan suhu dan kelembaban tinggi dan rendah untuk waktu yang lama. Ini mengadopsi penyegelan lapisan ganda dan memiliki efek penyegelan yang baik.

5. Ketika ruang uji terhubung ke tabel getaran, ruang uji akan secara otomatis bergerak secara horizontal ke posisi koneksi tabel getaran, dan kemudian mengangkat ke posisi koneksi antarmuka sesuai dengan ketinggian yang diperlukan, dan kemudian uji getaran suhu dan kelembaban dapat dilakukan dengan ruang uji.

 

Parameter Produk:

Item	Specification
Internal chamber dimension (W*D*H)	1000*1000*1000mm
External chamber dimension(W*D*H)	1200*3000*3800mm approx.
Temperature range	-40 ℃~ 150℃
Temperature fluctuation	±0.5℃
Temperature uniformity	2℃
Cooling speed(temp. Range: 85C~-40C)	5℃/min in average; without loading
Heating speed(temp. Range: -40C~85C)	5℃/min in average; without loading
Humidity range	10~98%RH (please refer to the below humidity curve)
Humidity fluctuation	±3%RH
Internal chamber material	SUS#304 stainless steel, mirror finished
External chamber material	Stainless steel with paint spray
Cooling method	Water-cooled
Controller	Programmable control temperature and humidity Can set different parameter for cyclic test
Insulation material	50mm high density rigid Polyurethane foam
Heater	Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
Compressor	German Bock compressor
Refrigerant	Environmental friendly refrigerant R449A/R23
Temperature sensor	PT-100 dry and wet bulb sensor
Observation window	Tempered glass
Testing hole	2 units with diameter 100mm, for cable routing
Sample tray	SUS#304 stainless steel, 2pcs
Safety protection device	Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit

 

Sistem Getaran:

Vibration Shaker
Max. Sine Force	3200Kg.f peak
Max. Random Force	3200Kg.f r.ms
Max. Shock Force	6400Kg.f peak
Frequency Range	2~3000Hz
Displacement (p-p)	51 mm
Max. Velocity	2m/s
Max. Table Acceleration	100g (without loading)
Armature Diameter	335mm
Effective Armature Mass	30kg
HE/ST screw dimension	17×M10
Max. Load Capacity	300kg
Magnetic Leakage	＜10gauss
Axial Vibration Isolation Frequency	<2.5Hz
Power	Three-phase, 380V, 50Hz
Machine dimension	845mm*790mm*840mm; without expander table
Vibration controller system
Controller Hardware	No of input channels: 02 analogue channels ADC: 24-bit Resolution No of output channels: 01 DAC: 24-bit Resolution USB 2.0 communication port
Controller Software Modules	Random Vibration (1-5000Hz), Sweep Sine Vibration (1-5000Hz), Classical Shock, Resonance Search, Track and Dwell and Self Calibration
Other accessory	Test Computer: LENOVO M4500 Printer: HP 1020plus
Customer Responsibilities	Installing all utilities where required, including connecting utilities to the equipment Installation/rigging of equipment Completing any necessary building alterations including roof penetrations Customers responsible for any permits required by – local/state government

 

Meja Geser Horisontal & Ekspansi Kepala Vertikal

Expander
Expander Size	600*600mm
Material	Aluminum alloy with hard anodized surface
Max. Work Frequency	Sine: 1000Hz Random: 2000Hz
Weigh	32kg
Slip Table
Table Size	600*600mm
Material	Aluminum alloy with hard anodized surface
Max. Work Frequency	Sine: 1000Hz Random: 2000Hz
Weight	35kg
Note: 1. High pressure oil-film bearing is used for better uniformity.

 

Penguat Daya & Blower

 

 

• Telp & Whatsapp 0812-1248-2471
• Email alfin@testindo.com