Alat Ukur Ketebalan Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP

Pengukur Ketebalan Ultrasonik NOVOTEST UT-1M-IP adalah versi khusus pengukur ketebalan ultrasonik, dirancang untuk mengukur ketebalan berbagai bahan dan produk untuk akses satu arah dalam kondisi iklim yang sulit.

Category: Tags: ,

Description

Pengukur Ketebalan Ultrasonik NOVOTEST UT-1M-IP adalah versi khusus pengukur ketebalan ultrasonik, dirancang untuk mengukur ketebalan berbagai bahan dan produk untuk akses satu arah dalam kondisi iklim yang sulit – di ruangan berdebu, dalam kelembapan tinggi, di dalam ruangan. hujan – ketika penggunaan pengukur ketebalan ultrasonik konvensional tidak memungkinkan.
Ini digunakan untuk mengontrol ketebalan bahan seperti kaca, logam dan paduan, polimer, plastik dan banyak lainnya. Benda dapat berupa pipa, produk canai, struktur, produk dan bagian untuk berbagai keperluan dan bentuk.

NOVOTEST Lab adalah laboratorium nyata di saku Anda! Opsional hanya dengan model UT-1M-IP (Lab)!
Hasil pengukuran, penyesuaian dan kalibrasi alat pengukur ketebalan ultrasonik di smartphone – aplikasi inovatif NOVOTEST untuk smartphone berbasis Android.
Fungsi perangkat belum pernah seluas ini sebelumnya! Dengan koneksi Bluetooth, ponsel cerdas Anda dapat mengontrol semua fungsi pengukur ketebalan ultrasonik NOVOTEST tanpa kabel. Antarmuka intuitif dari aplikasi itu sendiri, akses ke Internet, email dan pesan instan, layar sentuh, kamera, mikrofon, dan penerima GPS pada perangkat seluler membuat penggunaan perangkat NOVOTEST jauh lebih nyaman dan serbaguna.

Keuntungan utama dari Pengukur Ketebalan Ultrasonik NOVOTEST UT-1M-IP:

MENINGKATKAN KETAHANAN DEBU DAN KELEMBABAN
Perlindungan unik terhadap debu dan kelembapan – secara default, perangkat dilengkapi dengan tingkat perlindungan debu dan kelembapan IP65 menurut DIN 40050. Saat memesan, versi pengukur ketebalan dengan perlindungan kelembapan hingga IP67 tersedia (diperbolehkan direndam dalam air ).

 

 

 

 

OTONOMI PERANGKAT YANG BELUM PERNAH DITAMBAHKAN
Karena fitur sirkuit dan mode pengoperasian – waktu pengoperasian perangkat secara terus-menerus dalam praktiknya mencapai 200 jam. Apa yang membuat perangkat ini ideal untuk kondisi lapangan tanpa adanya pasokan listrik.

 

 

 

 

BERBAGAI MACAM PENGUKURAN
Pengukur Ketebalan Ultrasonik NOVOTEST UT-1M-IP dapat dilengkapi dengan berbagai jenis transduser, namun perangkat ini memiliki kemampuan pengaturan transduser tingkat lanjut (penguatan, jalur, koreksi V, dll.), yang memungkinkan pengguna untuk mendapatkan jangkauan operasi maksimum dengan satu transduser, dalam praktiknya, jangkauan operasi probe 5 MHz mencapai 0,5 hingga 500 mm.

 

 

 

PERPUSTAKAAN MATERI DAN PROBE
Perangkat ini memiliki perpustakaan kecepatan bahan dasar, serta arsip transduser, yang memungkinkan operator melakukan pengukuran pada berbagai objek tanpa informasi referensi tambahan dan pengaturan yang rumit. Selain itu, pengguna dapat secara mandiri mengisi kembali arsip pengaturan.

 

 

 

 

TRANSFER DATA KE PC

Perangkat ini memungkinkan pengguna untuk mencatat hasil pengukuran dalam arsip perangkat, dan kemudian mentransfernya ke PC menggunakan perangkat lunak khusus – NOVOTEST.INFO/USB-connect. Perangkat memiliki konektor penampung air khusus dan kabel khusus dalam set.

ADVANTAGES

  • Unique protection from dust and moisture, previously not available in the market of ultrasonic thickness gauges of general purpose. By default the device comes with a degree of dust-moisture protection IP65. This protection degree can be increased up to IP67 (submerged in water) at order
  • Unprecedented autonomy of the device – increased up to 200 hours continuous operation time of the thickness gauge
  • Special rubber lining on the side surfaces of the casing facilitates the convenient retention of the thickness gauge in the user’s hand
  • Device has light weight and dimensions, in comparison with similar protected thickness gauges
  • Saved data can be transmit to PC
  • Material selection and automatic setting of ultrasound velocity
  • Large graphic display of high contrast and backlight
  • Display of measured thickness in mm and inches
  • Convenient menu in the device
  • Wide choice of UT probes with preset settings in the device
  • Modes of statistical processing of measurements
  • Ability to restore factory calibrations
  • Ability to adjust all parameters of the acoustic path
  • Ability of further adjusting the user gain directly from the measurement mode
  • Wide range of testing
  • Mode of audible and visual alarm when leaving the established ranges
  • Wireless connection with Android gadgets via NOVOTEST Lab App (optionally with UT-1M-IP (Lab) model only)
  • Wide measurement range (0.4 to 1500 mm and more)
  • Available probes 1.25-10 MHz:
    – 1.25MHz probe (echo) 20/2 for substantial thicknesses or materials with exceptionally high signal attenuation
    – 2.0MHz probe (echo) 20/2 for large thicknesses or materials with high signal attenuation
    – 2.5MHz probe (echo) 12/2 for thick samples
    – 5MHz probe (echo) 10/2 for a wide range of basic samples
    – 10MHz probe (echo) 6/2 for thin samples
    – 10MHz probe (echo) 2х3 for products of complex shapes, usually turbine blades
    – 5MHz high-temperature probe (echo) 10/2 for heated samples up to 250 °С/482 °F
    – 2.5MHz probe (echo-echo) 12/2 for through coating
    – 5MHz probe (echo-echo) 10/2 for through coating
    – 10MHz probe (echo-echo) 6/2 for through coating
    – 5MHz probe (echo-echo) 10/2 for through coating, underwater, 10 m cable
    – 5MHz probe (echo-echo) 10/2 for through coating, underwater, 20 m cable
    – 5MHz probe (echo-echo) 10/2 for through coating, underwater, 30 m cable
  • Gain adjustment (±20 Db)
  • Preset velocities for many materials
  • B-scan and control modes
  • Through-coating (echo-echo) mode
  • Threshold setting with automatic alarm
  • Saving the settings for different probes
  • Compatibility with probes of other manufacturers
  • V-path correction and TVG adjusting for the user’s probes
  • Measurement storage and PC software
  • PC cable connection:
    – Online – NOVOTEST.INFO/USB-connect
    – Offline – NOVOTEST USB-Connect
  • Wireless connection with Android gadgets via NOVOTEST LAB App (only for UT-1M-IP (Lab))

SPECIFICATIONS

Measuring thicknesses range on steel, mm:

  • Probe 10MHz – P112-10-2×3
  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • Probe 2MHz – P112-2-20 / 2
  • Probe 1,25MHz – P112-1.25-20 / 2
 0.4 to 1500 mm and more
(depending on material and surfaces)

  • 0.4-15
  • 0.45-300
  • 0.8-500
  • 2.5-1000
  • 3-1200
  • 4-1500
Probe dimensions, mm:

  • Probe 10MHz – P112-10-2×3
  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • Probe 2MHz – P112-2-20 / 2
  • Probe 1,25MHz – P112-1.25-20 / 2
  • 4×9×60
  • D12×15
  • D17×20
  • D20×21
  • D30×28
  • D30×35
Dimensions of probe contact area/crystal, mm:

  • Probe 10MHz – P112-10-2×3
  • Probe 10MHz – P112-10-6 / 2
  • Probe 5MHz – P112-5-10 / 2
  • Probe 2,5MHz – P112-2,5-12 / 2
  • Probe 2MHz – P112-2-20 / 2
  • Probe 1,25MHz – P112-1.25-20 / 2
  • 2×7/2×3
  • D9/D6
  • D14/D10
  • D16/D12
  • D24/D20
  • D24/D20
Optional probes:

  • 5MHz high-temperature probe (echo) 10/2
  • 2,5MHz probe (echo-echo) 12/2 for through coating
  • 5MHz probe (echo-echo) 10/2 for through coating
  • 10MHz probe (echo-echo) 6/2 for through coating
  • 5MHz probe (echo-echo) 10/2 for through coating, underwater, 10 m cable
  • 5MHz probe (echo-echo) 10/2 for through coating, underwater, 20 m cable
  • 5MHz probe (echo-echo) 10/2 for through coating, underwater, 30 m cable
  • range 0,8 – 300 mm,
    surface temperature up to 250 °С/482 °F
  • range 6 – 30 mm,
    coating thickness range – up to 1 mm
  • range 3,5 – 26 mm,
    coating thickness range – up to 1 mm
  • range 2 – 12 mm,
    coating thickness range – up to 0,6 mm
  • range 3,5 – 26 mm,
    coating thickness range – up to 1 mm
  • range 3,5 – 26 mm,
    coating thickness range – up to 1 mm
  • range 3,5 – 26 mm,
    coating thickness range – up to 1 mm
Compatible probe types
  • Ultrasonic, dual-element, longitudinal waves
    (including probes of other manufacturers)
Compatibility with Active EMAT Transducer EMAT-A1 No
Probe calibrations (V-path, TVG, etc.)
  • factory for NOVOTEST probes
  • users for probes of other manufacturers
Probe cable connector type 2 Lemo 00
Probe cable length, m 1,2
Measurement scales
  • mm (m/s)
  • inch (inch/μs)
Measurement resolution, mm/inch 0.01/0.001
(0.01/0.0001 by request)
Basic measurement accuracy, mm ± (0,01 T+0.05)
(*For range 0.8 – 300 mm)
Gain range, dB ± 20
Response time, with no more than, s 1
Setting range of the ultrasonic velocity, m / s 1000-17000
Preset velocities for materials Steel (8 different grades), Aluminum, Iron, Cast Iron, Zinc, Chromium, Copper, Brass, Bronze, Silver, Gold, Nickel, Tungsten, Tin, Lead, Molybdenum, Manganese, Magnesium, Rubber, Polystyrene, Plexiglas, Capron, Caprolon,  ED-5, Ebonite, Porcelain, Teflon, Textolite, Silicate Glass, Acrylic glass, User
Operating modes
  • Normal
  • B-scan
  • Control mode
Standards
  • ASTM E797
  • EN 14127
  • EN15317
Body type /
Dust and moisture protection level
  • Plastic, sealed
  • IP65
  • Optionally water immersion up to 1m deep for 30 min (IP67)
Calibration thickness block on the body 6 mm (Steel/~6080 m/s)
PC cable connection
Wireless connection with Android gadgets via NOVOTEST Lab App
  • UT-1M-IP – No
  • UT-1M-IP (Lab) – Yes
Storage capacity of measurement results
  • UT-1M-IP – 128
  • UT-1M-IP (Lab) – 128 in the device + in NOVOTEST Lab App limited only by the memory of the Android gadgets
Measurement archives
Menu languages English, Spanish, Ukrainian, Russian (other languages optional)
Operating environment
  • Temperature:-20°C~50°C
  • Humidity: 30%~80%R.H.
Power supply DC 4.5V (3 pcs standard batteries AA)
Time of continuous work hours, not less, h up to 200
Charging 5V USB charger
Weight of electronic unit with batteries, no more, kg 0.2
Overall dimensions, mm 120x60x25
Package weight, kg 1.5
Package dimensions, cm 33*27*10
Documents
Country of origin Made in Ukraine (Europe)
Warranty
  • Basic
    – 12 months for electronic unit
    – 6 months for probes
  • Extended (optional)
    – up to 3 years

General comparative chart of all models NOVOTEST ultrasonic thickness gauges (without UT-3M-EMAT) 

 Model name UT-2A UT-1M UT-1M-IP UT-1M-ST
Measuring thicknesses range for steel, mm 0,4 – 1500 (depends on probe) 0,45 – 1500 (depends on probe)
Resolution, mm 0,01
Basic measurement accuracy, mm ± (0,01*T+0,05)
Basic probes / range for steel 2,5 MHz / 2,5 – 1000 mm
5 MHz / 0,8 – 300 mm
10 MHz / 0,45 – 75 mm
Optional probes / range for steel 1,25 MHz / 4 – 1500 mm
2 MHz / 3 – 1200 mm
High-temperature 5MHz (up to 250 °С) / 0,8 – 300 mm
Echo-Echo 5MHz for through-coating measurements / 3,5 – 26 mm
Compatibility with
Active EMAT Transducer EMAT-A1		 Yes No
Compatible probe types Dual-element
Single-element		 Dual-element
Operating modes Normal
A-scan
B-scan
Manual mode
Control mode		 Normal
B-scan
Control mode
Measurement methods Echo
Echo-Echo
Peak-Peak
Zero-crossing		 Echo
Echo-Echo
Measurement units mm
inch
Display Color, 3,5 inch, 480*320 Monochrome, 2,5 inch, 128*64
Menu languages English
Ukrainian
Russian
(other languages optional)		 English
Spanish
Ukrainian
Russian
(other languages optional)
Body type/
Dust and moisture protection level		 Metal, durable /Standard for shop and field operation Plastic, with shockproof silicone case / Standard for shop and field operation Plastic, sealed /High – optionally water immersion up to 1m deep for 30 min Metal, durable /Standard for shop and field operation
Saving of the settings for different probes Yes
Compatibility with probes of other manufacturers Yes
V-path correction and TVG adjusting for the user’s probes Yes
Storage of measurement results 7000 and more
(Limited only by the memory card)		 128 128 128
PC cable connection
(via www.novotest.info)		 Yes
Smartphone Wireless connection
(via NOVOTEST Lab)		 No Optional Optional No
Charger type Any USB socket (charger adapter, PC, power bank, etc.) External charger for batteries Any USB socket
(charger adapter, PC, power bank, etc.)		 External charger for batteries
Battery Built-in Li-ion 2pcs standard
АА batteries		 3pcs standard
АА batteries		 2pcs standard
АА batteries
Electronic unit weight, no more, kg 0,5 0,25 0,35 0,35
Dimensions (L x W x H), mm 165x90x50 122х76х37 160х90х28 130х90х40
Minimum time of continuous work, h 10 25 25 25
Operating temperature range, ° C -20 to +40

AVAILABLE OPTIONS

  • – UT-1M-IP (Lab) – with Wireless connection to Android gadgets via NOVOTEST Lab App
    – UT-1M-IP – basic model
  • Couplant
  • Calibration certificate issued by the Independent metrology laboratory
  • Certificate of origin issued by the Chamber of Commerce and Industry
  • UT-probes

– 1.25MHz probe for thickness gauge 20/2
– 2.0MHz probe for thickness gauge 20/2
– 2.5MHz probe for thickness gauge 12/2
– 5MHz probe for thickness gauge 10/2
– 10MHz probe for thickness gauge 6/2
– 10MHz probe for thickness gauge 3х2
– 5MHz probe for thickness gauge (echo-echo) 10/2
– 10MHz probe for thickness gauge (echo-echo) 6/2
– 5MHz high-temperature probe for thickness gauge 10/2
– 5MHz probe for thickness gauge (echo-echo) 10/2, underwater, 10 m cable
– 5MHz probe for thickness gauge (echo-echo) 10/2, underwater, 20 m cable
– 5MHz probe for thickness gauge (echo-echo) 10/2, underwater, 30 m cable

  • Step wedge Calibration Blocks
Thickness nominals Material
1-3-5-7-10-15 mm Steel, SS, Aluminum
1-2-3-4-5-6-7-8-9-10-11-12-13-14-15 mm Steel, SS, Aluminum
2,5-5-7,5-10-12,5 mm Steel, SS, Aluminum
2,5-5-7,5-10-12,5-15-17,5-20 mm Steel, SS, Aluminum
2,5-5-7,5-10-12,5-15-20 mm Steel, SS, Aluminum
2.5-5-10-20 mm Steel, SS, Aluminum
2-3-4-5-6-7-8-9-10 mm Steel, SS, Aluminum
2-3-4-5-6-7-8-9-10-11 mm Steel, SS, Aluminum
2-4-6-8-10 mm Steel, SS, Aluminum
2-4-6-8-10-12 mm Steel, SS, Aluminum
2-5-10-15-20-25 mm Steel, SS, Aluminum
2-5-10-20-30-40 mm Steel, SS, Aluminum
3-4-5-6-7-8-9 mm Steel, SS, Aluminum
4-6-8-10-12-15 mm Steel, SS, Aluminum
5-10-15-20-25-30 mm Steel, SS, Aluminum
5-10-15-20-25 mm Steel, SS, Aluminum
5-10-15-20-30-40 mm Steel, SS, Aluminum
5-10-15 mm Steel, SS, Aluminum
5-10-20 mm, step 0.1 Steel, SS, Aluminum
5-10-20-30-40-50 mm Steel, SS, Aluminum
10-11-12-13-14-15 mm Steel, SS, Aluminum
10-20-30-40-50 mm Steel, SS, Aluminum
10-20-40-60-80-100 mm Steel, SS, Aluminum
  • Reference Thickness Blocks
0,2 mm Steel, SS, Aluminum
0,3 mm Steel, SS, Aluminum
0,4 mm Steel, SS, Aluminum
0,5 mm Steel, SS, Aluminum
0,8 mm Steel, SS, Aluminum
1 mm Steel, SS, Aluminum
1,5 mm Steel, SS, Aluminum
2 mm Steel, SS, Aluminum
3 mm Steel, SS, Aluminum
4 mm Steel, SS, Aluminum
6 mm Steel, SS, Aluminum
10 mm Steel, SS, Aluminum
15 mm Steel, SS, Aluminum
20 mm Steel, SS, Aluminum
25 mm Steel, SS, Aluminum
30 mm Steel, SS, Aluminum
40 mm Steel, SS, Aluminum
50 mm Steel, SS, Aluminum
75 mm Steel, SS, Aluminum
90 mm Steel, SS, Aluminum
100 mm Steel, SS, Aluminum
125 mm Steel, SS, Aluminum
150 mm Steel, SS, Aluminum
175 mm Steel, SS, Aluminum
200 mm Steel, SS, Aluminum
300 mm Steel, SS, Aluminum

STANDARD PACKAGE

  • Electronic unit Ultrasonic Thickness Gauge UT-1M-IP/UT-1M-IP (Lab) 
  • Probe/transducer (echo) – 1 pc for choice
    (2.5MHz, 5MHz or 10MHz)
  • Accessory package:
    – AA batteries – 3 pcs
    – 5V USB charger
    – USB cable for PC
    – PC software:
    — Online – NOVOTEST.INFO/USB-connect
    — Offline – NOVOTEST USB-Connect
    – NOVOTEST LAB App for Android gadgets
    (for UT-1M-IP (Lab) only)
    – Operating manual/Quick guide
    – Transportation plastic case

 

Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com

Reviews

There are no reviews yet.

Be the first to review “Alat Ukur Ketebalan Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP”

Your email address will not be published. Required fields are marked *

Related products