Description
Sensor ORP RK500-06 merupakan solusi sederhana dan hemat biaya untuk berbagai macam aplikasi air limbah dan proses. Sensor all-in-one ini menyediakan pengukuran ORP dan suhu secara simultan. Bodi Ryton yang kokoh dirancang untuk memudahkan pemasangan secara online melalui koneksi berulir runcing 3/4 inci yang disediakan di kedua ujung sensor. Sensor bodi lebar (diameter 26 mm) menampung empat elemen terpisah dalam satu bodi Ryton yang tidak dapat dipecahkan, elektrolit gel bervolume besar, dan sistem referensi persimpangan ganda memperlambat penipisan dan keracunan sehingga memperpanjang masa pakai.
| Item | Technical Specification | |
| ORP | ||
| Measurement Principle | Electrochemical(platinum ring) | |
| Range | -1500mV-+1500mV | |
| Resolution | 0.1mV | |
| Accuracy | ±0.5mV | |
| Supply | 7-30VDC | |
| Response time | 5s | |
| Output | 4-20mA & RS485 at the same time | |
| Operating Environment | -10-+80℃(<0.6MPa) | |
| Stability | ≤1%/year | |
| Maintenance | Every 1 months to clean the electrode, every 6 months calibrated | |
| Power consumption | <0.4W | |
| Ingress Protection | IP68 | |
| Storage | 10-60℃@20%-90%RH | |
| Cable length | 5m default, customizable | |
DIMENSION
Type A
Universal type ABS housing, Up and down are NPT3/4 threads
Type B
Highly corrosion resistant PPS housing. Up and down are NPT3/4 threads
Type C
Standard glass type Lenght=120 mm
Unit:MM
ELECTRODE MAINTENANCE & INSTALLATION AND FIXED
PH electrode is not used at ordinary times and can be soaked in 3mol/l KCL solution or saturated KCL solution. It is strictly prohibited to immerse the electrode in distilled water and deionize the water or tap water with minimal plasma content.If the PH electrode is contaminated with inorganic substances, it can be cleaned with 0.1mol/l Hcl or NaOH solution for a few minutes and then washed with distilled water. If the PH electrode is contaminated with organic substances, it can be cleaned with alcohol or acetone and then cleaned with distilled water.(note: the protective cap before the electrode should be removed when using);
Clean the electrode with tap water every 3 months or 6 months according to the working environment.
PRODUCT DETAILS
- Biodegradation
- Agricultural Irrigation
- Chemical
- Reservoir
- River
- Water Treatment
- Well
- Urban Sewage
Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com
Reviews
There are no reviews yet.