Description
Sistem kontrol intensitas cahaya terbaru untuk deteksi warna apa pun yang andal
Teknologi canggih yang merespons 600.000 kali perubahan intensitas cahaya benda kerja.
Empat kepala penginderaan berbeda mulai dari jarak jauh hingga deteksi presisi tinggi
Mendukung berbagai aplikasi dengan jarak deteksi 20~1000mm.
Fungsi anti-interferensi
Saat menghubungkan unit ekspansi, interferensi dicegah antara kepala sensor yang terhubung ke penguat yang berdekatan.
Products Lineup
Sensor head
| Appearance | Standardized testing deviation | Measuring distance (mm) | Laser type | Model | ||
 |
0.5mm | 20~45 | Class 2 | LA-H45 | ||
| Class 1 | LA-H45L | |||||
 |
1mm | 55~130 | Class 2 | LA-H130 | ||
| Class 1 | LA-H130L | |||||
 |
3mm | 160~450 | Class 2 | LA-H450 | ||
| Class 1 | LA-H450L | |||||
 |
20mm (detecting distance is 200-800mm) 30mm (detecting distance is 800-1000mm) |
200~1000 | Class 2 | LA-H1000 | ||
| Class 1 | LA-H1000L | |||||
Controller
| Appearance | Type | Output type | Model |
 |
DIN rail mounting | NPN | LA-21 |
| PNP | LA-21P | ||
 |
NPN | LA-22 | |
| PNP | LA-22P |
Cable (extension cable for connection between the sensor head and the controller) Optional
| Appearance | Sensor side | Cable termination | Material | Cable length | Model |
 |
M10 4PIN Straight | Controller | Highly flexible drag chain type | 2M | OW-LAH2000 |
| 5M | OW-LAH5000 | ||||
| 10M | OW-LAH10M | ||||
| 20M | OW-LAH20M |
Technical Specifications
Sensor head
| Model | LA-H45 | LA-H45L | LA-H130 | LA-H130L | LA-H450 | LA-H450L | LA-H1000 | LA-H1000L | |
| Detecting distance (mm) (Amplifier display value) |
20 to 45 (250 to 0) |
55 to 130 (750 to 0) |
160 to 450 (290 to 0) |
200 to 1000 (800 to 0) |
|||||
| Amplifier display range | 259 to -34 | 768 to -98 | 295 to -50 | 810 to -175 | |||||
| Light source | Type | Red laser (639nm) | |||||||
| Laser type | Class 2 | Class 1 | Class 2 | Class 1 | Class 2 | Class 1 | Class 2 | Class 1 | |
| Output | 400uW | 250uW | 400uW | 250uW | 600uW | 250uW | 600uW | 250uW | |
| Standard detection offset | 0.5mm | 1mm | 3mm | 20mm ( detecting distance is 200-800mm ) 30mm ( detecting distance is 800-1000mm ) |
|||||
| Protection class | IP67 | ||||||||
| Ambient temperature | -10 to +50 °C (no freezing) | ||||||||
| Relative humidity | 35 to 85% RH ( no condensation) | ||||||||
| Ambient luminosity | Incandescent: 7500lx Daylight: 10000lx | ||||||||
| Material | Housing: PBT Indicator cover: PC Lens cap: glass Cable: PVC | ||||||||
| Wire length | 160mm | ||||||||
| Weight | Approx. 60g | Approx. 80g | Approx. 130g | ||||||
| Mounting bracket (optional) | OW-LAH001 | OW-LAH002 | OW-LAH003 | ||||||
Controller
NPN output
| Model | LA-21 | LA-22 | |
| Main module / Expansion module | Main module | Expansion module | |
| Output type | NPN | ||
| Mounting type | DIN rail mounting | ||
| Sensor head compatibility | Available | ||
| Display | Minimum display unit | LA-H450: 1mm, LA-1000: 5mm | |
| Display range | LA-H450: -50mm to 295mm, LA-1000: -175mm to 810mm | ||
| Display rate | Approx. 10 times/sec. | ||
| Analog voltage output | ±5V, 1 to 5V, 0 to 5V output impedance 100Ω | – | |
| Analog current output | 4 to 20 mA maximum load resistance 350Ω | ||
| Control input | Channel switching input | NPN: ON when connected to 0V, OFF when connected to 24V; PNP: ON when connected to 24V, OFF when connected to 0V; |
|
| Zero drift input | |||
| Transmit stop input | |||
| Timer input | |||
| Reset input | |||
| Control output*¹ | Judgment output | Open collector, 50mA max (NPN/PNP; normally open/closed, switchable) | |
| Alarm output | Open collector, 50mA max (NPN/PNP; normally closed, non-switchable) | ||
| Power supply | Power voltage*¹ | 10 to 30 VDC including ripple (P-P) 10% Class 2 or lower | Power supply through the main unit |
| Power consumption (without load) | 1950 mW or less (at 30 V, 65 mA max.) | 1800 mW or less (at 30 V, 60 mA max.) | |
| Ambient temperature | -10 to + 50 °C ( no freezing ) | ||
| Ambient humidity | 35 to 85% RH ( no condensation) | ||
| Vibration resistance | 10 to 55 Hz, 1.5 mm dual amplitude, 2 hours each for X, Y, and Z axes | ||
| Material | Housing: Polycarbonate Key: Polyacetal Cable: PVC | ||
| Cable length | 2m | ||
| Weight (including accessories) | Approx. 150g | Approx. 140g | |
*1 Batasan berikut berlaku, tergantung pada jumlah unit yang akan dihubungkan ke unit ekspansi.
Saat menghubungkan 2 hingga 8 unit termasuk unit utama
– Tegangan catu daya: 20 hingga 30 VDC
– Arus keluaran kontrol: maks. 20 mA
PNP output
| Model | LA-21P | LA-22P | |
| Main module / Expansion module | Main module | Expansion module | |
| Output type | PNP | ||
| Mounting type | DIN rail mounting | ||
| Sensor head compatibility | Available | ||
| Display | Minimum display unit | LA-H450: 1mm, LA-1000: 5mm | |
| Display range | LA-H450: -50mm to 295mm, LA-1000: -175mm to 810mm | ||
| Display rate | Approx. 10 times/sec. | ||
| Analog voltage output | ±5V, 1 to 5V, 0 to 5V output impedance 100Ω | – | |
| Analog current output | 4 to 20 mA maximum load resistance 350Ω | ||
| Control input | Channel switching input | NPN: ON when connected to 0V, OFF when connected to 24V; PNP: ON when connected to 24V, OFF when connected to 0V; |
|
| Zero drift input | |||
| Transmit stop input | |||
| Timer input | |||
| Reset input | |||
| Control output*¹ | Judgment output | Open collector, 50mA max (NPN/PNP; normally open/closed, switchable) | |
| Alarm output | Open collector, 50mA max (NPN/PNP; normally closed, non-switchable) | ||
| Power supply | Power voltage*¹ | 10 to 30 VDC including ripple (P-P) 10% Class 2 or lower | Power supply through the main unit |
| Power consumption (without load) | 1950 mW or less (at 30 V, 65 mA max.) | 1800 mW or less (at 30 V, 60 mA max.) | |
| Ambient temperature | -10 to + 50 °C ( no freezing ) | ||
| Ambient humidity | 35 to 85% RH ( no condensation) | ||
| Vibration resistance | 10 to 55 Hz, 1.5 mm dual amplitude, 2 hours each for X, Y, and Z axes | ||
| Material | Housing: Polycarbonate Key: Polyacetal Cable: PVC | ||
| Cable length | 2m | ||
| Weight (including accessories) | Approx. 150g | Approx. 140g | |
*1 Batasan berikut berlaku, tergantung pada jumlah unit yang akan dihubungkan ke unit ekspansi.
Saat menghubungkan 2 hingga 8 unit termasuk unit utama
– Tegangan catu daya: 20 hingga 30 VDC
– Arus keluaran kontrol: maks. 20 mA
Kontak Kami :
Telp/Whatsapp : 0812 1248 2471
Email : alfin@testindo.com
Reviews
There are no reviews yet.