Description
Informasi Produk
Spesifikasi Teknis
1. Aplikasi dan Fungsi
1.1Aplikasi: terutama digunakan untuk pengujian kehidupan lingkaran dan kontrol kualitas baterai li-ion dan baterai VRLA yang berfungsi di lini produksi atau di laboratorium.
1.2Mendukung pengujian masa pakai lingkaran baterai, pengujian kapasitas, pengujian karakteristik pengisian daya, pengujian karakteristik pemakaian, pengujian kemampuan retensi muatan,
Pengujian efisiensi pengisian dan pengosongan, pengujian keterjangkauan tingkat pengisian berlebih atau pelepasan berlebih.
2. Lingkungan Kerja dan Parameter Teknis
2.1 Catu daya: AC300V±15%
2.2 Mode Kontrol:Mode CC dan mode CV adalah struktur loop tertutup ganda, setiap saluran dikontrol secara independen
2.3 Umpan Balik Energi: Umpan balik energi daya penuh, energi umpan balik diprioritaskan pada beban lokal, dan kelebihan energi diumpankan ke jaringan listrik
| Model Name | HD–E7001-800V200A | ||
| Channel Basic Parameters | |||
| Max. Voltage | 800V | ||
| Max. Current | 200A | ||
| Main Channel Number | 1 | ||
| ADC Bits | 24 Bit | ||
| Control Mode | The CC mode and CV mode are double closed loop structure, each channel is independently controlled | ||
| Energy Feedback | Full power energy feedback, the feedback energy is given priority to the local load, and the excess energy is feedback to the grid | ||
| Grid Side Parameters | |||
| Voltage Range | 400Vac/480Vac ±10% | ||
| Frequency Range | 50Hz/60Hz ±5Hz | ||
| Max. Power | 173.9kW | ||
| Power Factor | >0.99 | ||
| THDi | <5% | ||
| Wiring | 3W+PE | ||
| Isolation Type | Low Frequency Isolation | ||
| Channel Voltage Parameters | |||
| Charge Voltage Range | 0～800V | ||
| Discharge Voltage Range | 3V～800V | (Add accessories to discharge to 0V ) | |
| Voltage Accuracy | ±0.05% F.S | ||
| Voltage Resolution | 1mV | ||
| Voltage Ripple | ±0.5% F.S | ||
| Channel Current Parameters | |||
| Single CH Current Range | -200A～200A | ||
| Parallel CH Current Range(Optional) | / | ||
| Current Accuracy | ±0.05% F.S | ||
| Current Resolution | 1mA | ||
| Min. Cut-off Current | ±0.2% F.S (Can be adjusted down according to demand) | ||
| Channel Power Parameters | |||
| Single CH Max. Power | 160kW | ||
| Parallel CH Max. Power | / | ||
| Power Accuracy | ±0.1% F.S | ||
| Power Resolution | 1W | ||
| Charge and Discharge Parameters & Functions | |||
| Current Response Time | ≤10ms(10%～90%) | ||
| Charge and Discharge Switching Time | ≤20ms(-90%～+90%) | ||
| Min. Pulse Width | 100ms | ||
| Charge Mode | CC, CV, CC-CV, CP, Current Ramp, Pulse, etc. | ||
| Discharge Mode | CC, CC-CV, CP, CR, Current Ramp, Pulse, DCIR, etc. | ||
| Cut-off/Jump Condition | Voltage, Current, Time, Temperature, Capacity, Energy, -ΔV, Expression Function, etc. | ||
| Loop Test Range | 1～65535 Times | ||
| Editable number of steps | 254 Steps | ||
| Loop Nesting | Support 3 Layers | ||
| Programming Features | There are multiple exits for each step, with “goto” function, which can jump arbitrarily | ||
| Simulation File | Can import the working condition file (DBC format), edit the working condition file according to the communication protocol | ||
| Simulation lines limit | 1 Million Rows | ||
| Simulation Switching time | 100ms | ||
| Grid Side Protection | Overvoltage Protection, Overcurrent Protection, Phase Loss Protection, Overheat Protection, Overload Protection, Short Circuit Protection, Communication Interruption Protection, Emergency Stop Protection, etc. | ||
| Battery Side Protection | Overvoltage Protection, Overcurrent Protection, Power Failure Protection, Reverse Connection Protection, Communication Heartbeat Protection, Overcapacity Protection, Sampling Line Drop Protection, etc. | ||
| Efficiency (Full Load) | >92% | ||
| PC Software Parameters & Functions | |||
| Communication Type | TCP/IP Protocol | ||
| Functional Test Items | Operating Condition Simulation, Capacity, Internal Resistance, Cycle Life, Charge/Discharge Characteristics, Pulse Charge-Discharge Characteristics, Charge Retention Capability, Charge-Discharge Efficiency, Overcharge/Overdischarge Tolerance, Cell Temperature /Voltage Characteristics, Consistency Assessment , etc. | ||
| Software Step Operation | Cut/Paste Step, Forced Step Jump, Condition Jump, Loop Test, etc. | ||
| Min. Time Interval | 10ms | ||
| Min. Voltage Interval | 0.1mV | ||
| Min. Current Interval | 0.1mA | ||
| Data protection | Power-Down Data Protection | ||
| Offline Test | |||
| Safety protection conditions can be set, setting parameters include: Voltage Upper Limit, Voltage Lower Limit, Current Upper Limit, Current Lower Limit, Delay Time, etc. | |||
| Software/System Interface | Database, MES System, LIMS System, etc. | ||
| Peripheral | Communication Ports | RS485, RS232, CAN2.0A, CAN2.0B, CANFD, Ethernet, etc. | |
| Devices | BMS, Auxiliary Voltage, Auxiliary Temperature, Environmental Test Box, Water Cooler, Insulation Monitoring, Adjustable Power Supply, Equalization Equipment, etc. | ||
| Basic Parameters | |||
| Size | W*D*H: 2000*1070*1980(mm) | ||
| Weight | ≈ 1500kg | ||
| Protection Level | IP20 | ||
| Cooling Type | Air-Cooled | ||
| Noise | <75dB | ||
| Storage Temperature | -30℃~70℃ | ||
| Operating Temperature | -10℃~45℃ | ||
| Humidity | <85% (No Condensation) | ||
| Altitude | ≤2000m | ||
| Optional Accessories | |||
| Computer | i5, 8G, 1T, Integrated Graphics, 21-inch, Windows10 Chinese Operating System, Mouse (Customizable) | ||
| DC Cable | Room temperature RV, Silicone Cord, etc. (Customizable) | ||
| Fixture | Polymer Clamps, Alligator Clips, OT Terminals, Toggle Clamps, etc. | ||
| Battery Rack | Designed according to the battery size and the number of channels, the laminate is insulated, and the bottom is equipped with casters (Customizable) | ||
| Auxiliary Channel | Designed according to the maximum voltage, temperature range, thermocouple type, and number of channels | ||
| Discharge to 0V Module | Designed according to the number of channels | ||
| Charge and Discharge Different Port Module | Designed according to the maximum voltage, maximum Current, and the number of channels | ||
| Negative Voltage Discharge Module | Designed according to the maximum voltage, maximum current , and the number of channels | ||
| Power Distribution Box (DC, AC) | Designed according to the maximum voltage, maximum current, and the number of channels | ||
| Power Transformer | Designed according to the maximum voltage and the maximum power | ||
- Telp & Whatsapp 0812-1248-2471
- Email alfin@testindo.com
Reviews
There are no reviews yet.