Description

RN400-T2GS, WiFi composite gas data logger

Environmental measuring devices with built-in Wi-Fi start communicating with AI cloud

A. Real-time monitoring

• Simultaneous measurement of complex gases

Measure up to 2 gases with RG10-NH3, RG10-H2S gas sensors.

B. Support for corporate WiFi

• Data Security

Measurement data is transmitted via WiFi, and enterprise-grade WiFi is also supported.

C. Cloud Monitoring

• Subscription software

We provide ready-made Radionode365. Just log in. Please contact us for SDK.

 

Standard for remote gas monitoring , RN400-T2GS

Data logger that transmits data via WiFi, ready for IoT

1. Simultaneous measurement of ammonia (NH3) and hydrogen sulfide (H2S)
2. Efficient power design including built-in UPS
3. Manufacturer’s calibration certificate provided for safe use
4. Manufacturer’s calibration certificate provided for safe use
5. Automatic backup when network is disconnected
   Retry transmission when network is restored
6. Support for data transfer with Radionode365 & user software

 

Support for data transfer with Radionode365 & user software

Don’t build a remote monitoring server , subscribe!

This product is initially set to transmit data to the Radionode365 monitoring service. You
can change the settings to link with the customer system server.

Radionode365 is a sensor data monitoring web service for smart sensor management.
Remotely manage with Radionode365 that satisfies both users and administrators.

 

 

Product Details

 

RN400-T2GS, Gas Data Logger Features

 

External sensor for easy periodic replacement

Supports RG10, a gas sensor unique to Radionode. Ammonia (RG10-NH3) and hydrogen sulfide (RG10-H2S) sensors with sintered filters for sensor protection provide more precise measurements. Two gases can be measured simultaneously.

 

 

 

 

 

 

Equipped with high-performance memory F-RAM

All data measured by RN400 is stored in F-RAM. F-RAM is a non-volatile memory that does not lose its contents even when there is no power. It is 100 times faster than general flash memory and has very high write endurance. The measured data is stored in F-RAM and is transmitted to the desired location by the user at each transmission cycle. Even when the Wi-Fi is disconnected, the data is continuously stored, so you can monitor with confidence.

 

 

 

 

Wi-Fi with strong security

Since the planning stage of RN400, multinational companies have been requesting high-level Wi-Fi functions. Accordingly, RN400 has been implemented to support enterprise security. This is a function that is not available in general home wireless routers, and is often used by companies that require a high level of security. In order to use Wi-Fi with enterprise security level Wi-Fi, you must register a separate ID/PASSWORD with the IT team in addition to the Wi-Fi password, and then receive a usable certificate from the IT team before using it.

 

 

 

 

IP65 waterproof rating

There are industrial sites with various environments. We have released the RN400 product with waterproof specifications to reflect the needs of various sites such as meat processing companies that perform water cleaning and pharmaceutical/bio that perform chemical disinfection. The outer housing is finished with a gasket with an IP65 rating, and the input/output part of the sensor is processed with a cable gland.

 

 

 

 

Efficient power design

RN400 uses a battery for Wi-Fi communication, so battery consumption must be designed well. When it is not a measurement cycle, the battery is not consumed, and the battery is used only when measuring/transmitting. DC power can also be used. At this time, the BUILT-IN UPS function is implemented in the circuit so that the built-in battery immediately acts as an auxiliary power source in the event of a power outage. Even if there is a power outage, the data collection function is performed normally.

 

 

 

 

How to use RN400-T2GS, Gas Data Logger

Easy to replace periodic gas sensor RG10 application

Simultaneous measurement of ammonia and hydrogen sulfide

Designed to facilitate periodic sensor replacement with support for Radionode’s RG10 external sensor. Radionode’s RG10 gas sensor has a sintered filter applied to protect the sensor. You can manage the site more safely and remotely.

OLED screen

Clear data even in the freezer

Equipped with an OLED screen on the front, you can check temperature and humidity values ​​clearly anywhere. Check the data coolly with the OLED screen that does not freeze even in a sub-zero freezer or in extremely cold weather outside.

Waterproof and dustproof

IP65

Basically, it is designed to be waterproof and dustproof to an IP65 rating. It can stably measure and transmit data in various external environments.

Alarm buzzer & warning light

Reflecting threshold values ​​set for each sensor

You can set the normal measurement range for each management site with your smartphone. For example, if the value of CH3 is out of the range of 12.0 to 33.50, the built-in buzzer will sound and an alarm will be sent to the registered person in charge.

Micro SD Card Backup

Usable even in enterprise-grade Wi-Fi environments

Simply insert the Micro SD card without any separate settings and the data file will be saved by date. The file is saved in CSV format and the file is created by day. Also, the certificate required when using WiFi Enterprise is stored in the MicroSD. It is stored.

Easy installation

Magnetic holder/screw hole

To make it easy for anyone to install, RN400 has four powerful magnets built into the inside. Simply attach it to the location you want to measure and you’re set. For locations where magnet mounting is not possible, you can fix it with a piece in the three screw holes.

Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com