Description
Pengujian statis dan dinamis yang sukses memberikan bukti untuk kapasitas beban bantalan rel dan kesesuaiannya untuk bagian jalur. Kualitas tersertifikasi dari teknologi bantalan rel kereta api modern menjadi semakin penting di sektor kecepatan tinggi. BESMAK menyesuaikan pengujian dengan standar nasional dan internasional yang spesifik dan geometri spesimen. Teknologi pengujian yang solid sangat penting ketika menguji sistem jalur yang sempurna pada kecepatan lebih dari 300 km/jam. Berbeda dengan solusi standar, desain yang disesuaikan dengan spesifikasi masing-masing menawarkan keuntungan yang jelas dari dimensi sampel dan penanganan yang diperhitungkan. Mesin uji rel dan bantalan rel hidrolik servo BESMAK® dengan desain rangka kaku tipe 4-kolom dapat digunakan untuk melakukan uji pembengkokan pada sampel rel dan bantalan rel. Mesin dapat melakukan pengujian yang dikontrol beban dan/atau dikontrol perpindahan untuk rel dan bantalan. Tersedia sistem pengangkutan sampel khusus untuk mempermudah aplikasi pengujian. Yang penting, uji tekuk bantalan juga dapat dilakukan pada mesin tunggal dengan akurasi yang sama. Mesin dapat melakukan aplikasi pengujian statis dan semi dinamis.
- Convenient working height and ergonomic controls improve operator productivity and comfort
- 4-columns frame, differential cylinder and high precision load measurement
- Solid cylinder, surface harderd and ground fine for a minimum friction
- Up to 500 mm piston stroke with anti-rotation system
- Fully automatic test execution with preset loading rate
- BESMAK® universal testing software
| Product Code | Product Name |
| BMT-400RSD | Servo Hydraulic Rail and Sleeper Dynamic Fatique Test System, 400 kN Capacity |
| BMT-500RSD | Servo Hydraulic Rail and Sleeper Dynamic Fatique Test System, 500 kN Capacity |
| BMT-1000RSB | Servo Hydraulic Rail and Sleeper Bending Test Machine, 1000 kN Capacity |
| BMT-2000RSB | Servo Hydraulic Rail and Sleeper Bending Test Machine, 2000 kN Capacity |
| BMT-3000RSB | Servo Hydraulic Rail and Sleeper Bending Test Machine, 3000 kN Capacity |
| BMT-200SB | Servo Hydraulic Sleeper Bending Test Machine, 200kN Capacity |
| BMT-400SB | Servo Hydraulic Sleeper Bending Test Machine, 400 kN Capacity |
| BMT-500SB | Servo Hydraulic Sleeper Bending Test Machine, 500 kN Capacity |
| BMT-600SB | Servo Hydraulic Sleeper Bending Test Machine, 600 kN Capacity |
Properties:
Rail and Sleeper Bending Test Machine, servo-hydraulic, 4 columns type rigid load frame with sufficient long test space to perform the test easily. Machine comes with special bending apparatus according to EN 13230 standard. Machine is equipped with a double acting special low friction piston with ≥ 300 mm piston stroke.
Load measurement and control with a load measurement system of class 1, 1 kHz data accusation Close-loop electronic controller, The electronic control unit of system is with 1000 samples per second and data acquisition speed. Accurate synchronization between frame and sensors will be done/controlled by advanced PID or close loop configuration. Electronic control unit has total 5 channels (2 internal, 3 external and 1 RS232/485). Due to these channels electronic control unit can control 5 no. sensors at same time.
Electronic control unit is feasible to attach and control video extensometer, laser extensometer, LVDT, automatic extensometer, strain gauge, load cell, SSI and TTL type sensors. Special Eeprom sensor plugs can store calibration and sensor data inside it. Due to this feature control unit can read sensor and calibration data even if user change it with new unit. Can perform load and displacement controlled test, position measurement and control with position sensor of 1 micron resolution.
Handheld unit, to move piston up and down without use of computer and to fix sample into the machine easily accurately and safely. Load channel with a resolution of 24 bit, adjustable load control in between 0.01kN/s – 120kN/s, adjustable displacement control in between 0.1mm/min – 100 mm/min, MTS position sensor with 0.001 mm resolution.
Besmak Universal Testing Software, user defined result parameters (connected to load and position). User can see real time test data from the software, can save require data and can get a test graph as well. User can also change graph axis between time, load, stress, strain, displacement etc. Test data can be transfer to excel format to use in research and development project. After finishing a test user can save test in computer and can also get a print as a report.
Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com
Reviews
There are no reviews yet.