Wireless Thermo-Hygrometer with Logging, Graphing, Alarming, Radio Controlled Clock with Remote Sensors WS-3000

Category:

Description

The WS-3000 monitors and graphs up to eight wireless remote sensors at the same time. The comprehensive data logger includes a TFT full color display with graphing and monitoring of temperature, humidity, dew point, and heat index. You can view channel 1 temperature, dew point or heat index from user friendly display. You are also able to monitor up to 8 channels at the same time, using imperial or metric measures. Includes minimum and maximum temperature and humidity display with easy reset option.

High and low alarms can be set for any of the measured parameters; audible and visual alarm will sound when a value is out of range. The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries. Optional temperature and humidity calibration is provided for the utmost accuracy, although the measurement can be adjusted from the console to calibrate to a known source.

The WS-3000 also includes PC software for advanced data analysis, console programming, and easy data extraction from the optional micro-SD card (sold separately).

The Indoor Thermo-Hygrometer

The WH31 indoor sensors will monitor temperature and humidity.

Certain configurations come with sensors; choose 3 sensors (, 5 sensors, or 8 sensors from the options above. Alternately you can mix & match from our compatible sensors (sold separately).

The Radio Controlled Clock

The clock includes 24 time zones throughout the world and automatically synchronizes several times a day based on a radio signal from Fort Collins, Co (Wave). It automatically adjusts for daylight savings time and your time zone.

The radio-controlled clock never needs resetting and is accurate to the second. An override daylight savings time feature is available for residents in Arizona.

PC Software:
The WS-3000 also includes PC software for advanced data analysis, console programming, and easy data extraction from the optional micro-SD card.

Notes:

  • Although the console reads 8 different channels, it will only display 5 sensors at one time. The remaining sensors must be programmed to scroll.
  • The graph will only display the first 5 sensors. However, the software will display and graph all 8 sensors.

 

Additional Features

  • 3 x Indoor/Outdoor temperature & humidity
  • Outdoor temperature range: lithium batteries: -40°F to 140°F
  • Outdoor temperature range: non-lithium batteries: -4°F to 140°F
  • Indoor/Outdoor Humidity range 10% to 99%
  • Dip switch selectable remote channels
  • Auto Re-sync if sensor reception is interrupted
  • Min/Max Memory for temperature & humidity
  • Monitors temperature and humidity in up to 8 remote locations
  • Includes three remote sensors – transmission range of up to 300 feet line of sight (100 feet under most conditions)
  • Frequency: 915 MHz
  • Update Rate: 60 seconds
  • Console Dimensions (LxHxW): 3.25 x 4.5 x 0.375 in (base 1.5″)
  • Sensor Dimensions (LxHxW): 4.75 x 1.5 x 0.6 in
  • Power requirements:
  • Console Power Consumption: 5V / 200 mA
  • Console AC Adapter included (5V / 1 A)
  • Remote Sensors – 2 x AA (not included)

 

Contact Us:
– Telp & Whatsapp 0812-1248-2471
– Email alfin@testindo.com

Reviews

There are no reviews yet.

Be the first to review “Wireless Thermo-Hygrometer with Logging, Graphing, Alarming, Radio Controlled Clock with Remote Sensors WS-3000”

Your email address will not be published. Required fields are marked *