Alat Uji Kekerasan UCI Hardness Tester NOVOTEST T-U2

 ‎

‎

‎

 

 

MENGUKUR KEKERASAN PRODUK BERBENTUK KOMPLEKS
Tujuan utama Penguji Kekerasan UCI NOVOTEST T-U2 adalah produk dengan bentuk yang rumit (gigi roda gigi, bantalan, dll.) dan tempat yang sulit dijangkau yang perlu diuji (alur, permukaan jari-jari, lasan, dan zona yang terpengaruh panas, dll.)

‎

‎

 ‎ ‎

‎

‎

‎

KERUSAKAN MINIMAL
Jejak setelah mengukur dengan penguji kekerasan UCI

sangat kecil, metode ini dianggap sebagai metode yang paling tidak merusak dari yang diketahui yang diimplementasikan dalam penguji kekerasan portabel. Selain itu, penetrasi indentor yang dangkal memungkinkan untuk mengukur kekerasan lapisan yang mengeras, seperti nitridasi, sementasi, dll.

‎

‎

BERBAGAI JENIS PROBE
Penguji Kekerasan UCI NOVOTEST T-U2 dapat dilengkapi dengan probe dengan beban yang berbeda sesuai dengan pilihan pelanggan. Deskripsi opsi yang memungkinkan disajikan dalam tabel di bawah ini:

Probe UCI Hardness Tester NOVOTEST T-U2 memiliki nosel yang membantu pengguna untuk mempertahankan tegak lurus penetrasi indentor ke permukaan datar, yang secara signifikan mengurangi kemungkinan kesalahan operator. Selain itu, dengan menggunakan mesin cuci khusus, probe UCI dapat dipasang pada permukaan radial, atau dapat digunakan tanpa nosel sama sekali untuk mengukur kekerasan bagian kecil dan alur.

PERLINDUNGAN TAHAN GUNCANGAN
Penguji Kekerasan UCI NOVOTEST T-U2 dilengkapi dengan casing silikon tahan guncangan yang mencegah perangkat tidak berfungsi saat terjatuh dari ketinggian hingga beberapa meter, sehingga perangkat dapat diandalkan dan tahan lama.

Penguji Kekerasan UCI NOVOTEST T-U2 juga dilengkapi dengan perangkat lunak khusus untuk mengoperasikan arsip perangkat dan transfer data selanjutnya untuk diproses dalam format yang sesuai.

KEUNGGULAN

• Kemungkinan untuk mengukur nilai kekerasan produk dengan berat dan ketebalan dari 1 mm (benda kecil, struktur berdinding tipis, pipa, tangki, lembaran baja, produk
• dengan bentuk yang rumit, kontrol kekerasan lapisan logam, dll.) dan mulai dari 100g.
• Jejak kecil pada permukaan produk yang diuji (pengguna dapat menguji permukaan cermin, poros leher, pisau, gigi roda gigi, dll.)
• Pengujian kekerasan pada lapisan pengerasan permukaan
• Berbagai macam pengukuran kekerasan
• Kegunaan pengukuran
• Jumlah kontrol minimum
• Kisaran suhu yang diperluas (terlindung dari embun beku, suhu pengoperasian hingga -20 ° C)
• Perangkat memiliki memori internal dan memungkinkan pengguna untuk terhubung dengan PC
• Menu yang intuitif

Spesifikasi

UCI probe types	1kgf (10N) 2.2 lbf 5kgf (50N) 11lbf 10kgf (98N) 22lbf
Indenter	Diamond indenter (UCI)
Measurement hardness range: Rockwell, HRC Brinell, HB Vickers, HV Tensile strength, MPa User calibrations	Factory calibrations: – HRC: 20~70 – HB: 90~650 – HV: 100~750 – Tensile strength MPa: 370~1740 User calibrations for any scale and range (for example: 1-2000HV)
Hardness scale	UCI probe: HRC, HB, HV, MPa
Measurement accuracy	HRC: 2HRC HB: 10HB HV: 15HV
Materials	UCI probe – pre-calibrated for steel. Additional custom scales and materials for calibration.
Measuring direction	Any direction 360°
Standards	ASTM A1038 ASTM E140 ISO 18265 DIN50159 GB/T 34205
PC cable connection	Online – novotest.info Offline – NOVOTEST AWP
Wireless connection with Android gadgets via NOVOTEST Lab App	T-U2 – No T-U2 (Lab) – Yes
Storage capacity of measurement results	T-U2 – 256 T-U2 (Lab) – 256 in the device + in NOVOTEST Lab App limited only by the memory of the Android gadgets
Language	English Spanish Portuguese French Russian *additional languages available by request
Dimensions, mm	122*65*23
Operating temperature range, ° C	-20 to +40
Power	2pcs AA batteries
Bateries life, hours, not less	20
Weight of electronic unit with batteries, no more, kg	0.2
Package gross weight, kg	2

AVAILABLE OPTIONS

• Android smartphone or tablet (optionally with IP65) for NOVOTEST Lab App
• Additional UCI probes:
  – UCI Probe U1 L3 (10N/HV1)
  – UCI Probe U1 L3 (50N/HV5)
  – UCI Probe U1 L3 (98N/HV10)

98N (10 kgf)	Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the probe).Low surface cleanliness requirements.	Heat-treated and cemented parts with poorly prepared surface. Measurement on blades, on the inner surface of pipes, holes with high roughness.
50N (5 kgf)	The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgf (set automatically by the probe). Medium surface cleanliness requirements.	Heat-treated and cemented parts, such as shafts, turbines, gears, teeth, welds, heat affected zones. Measurement in grooves, on teeth, in grooves, on radius surfaces. Measurement on the blades, on the inner surface of the pipes, holes.
10N (1 kgf)	Probe with reduced load – designed to measure the hardness of products with increased requirements for the size of the print (polished, polished surfaces), to measure the hardness of thin surface hardened layers. For the measurement, a load of 1 kgf must be applied.More demanding on surface cleanliness, compared with U1 (50N).	Nitrided and cemented surface layers of molds, dies, dies, thin-walled parts. Bearings, tooth flanks, saws. Hardness measurement of thin hardening coatings. Measurement on products after thorough machining.

• Device for measuring the hardness of thin sheets NOVOTEST U1-TL
• After the purchase if needed, can be ordered dynamic Leeb probe with activation code to convert to Combined (T-UD2) hardness tester with two types of probes (UCI+Leeb).
  Additional Leeb probes:
  – Dynamic probe Type DC-R
  – Dynamic probe Type DC-R-mini
  – Leeb probe Тype D
  – Leeb probe Type DL
  – Leeb probe Type G
  – Leeb probe Type D+15
  – Leeb probe Тype C
  – Leeb probe Type E
  As well as accessories for Leeb probes:
  – Set of support rings for Leeb probe
  – Cable for Leeb probe
  – Impact bodies for Leeb probes

• Hardness test blocks:
  For UCI probes:
  – Rockwell Hardness Test Block 25HRC (25±5 HRC)
  – Rockwell Hardness Test Block 45HRC (45±5 HRC)
  – Rockwell Hardness Test Block 65HRC (65±5 HRC)
  – Vickers Hardness Test Block 200HV (200±50 HV1)
  – Vickers Hardness Test Block 300HV (300±50 HV1)
  – Vickers Hardness Test Block 450HV (450±50 HV1)
  – Vickers Hardness Test Block 800HV (800±50 HV1)
  – Vickers Hardness Test Block 200HV (200±75 HV5)
  – Vickers Hardness Test Block 300HV (300±50 HV5)
  – Vickers Hardness Test Block 450HV (450±75 HV5)
  – Vickers Hardness Test Block 800HV (800±50 HV5)
  – Vickers Hardness Test Block 200HV (200±75 HV10)
  – Vickers Hardness Test Block 300HV (300±50 HV10)
  – Vickers Hardness Test Block 450HV (450±75 HV10)
  – Vickers Hardness Test Block 800HV (800±50 HV10)
  – Brinell Hardness Test Block 100НВ (100±25 HB 10/1000/10)
  – Brinell Hardness Test Block 200HB (200±50 HB 10/3000/10)
  – Brinell Hardness Test Block 300HB (300±50 HB 10/3000/10)
  – Brinell Hardness Test Block 400HB (400±50 HB 10/3000/10)
  – Brinell Hardness Test Block 600HB (600±50 HB 10/3000/10)For Leeb probes:
  – Leeb Hardness Test Block 530±40 HLD
  – Leeb Hardness Test Block 630±40 HLD
  – Leeb Hardness Test Block 790±40 HLD
  – Leeb Hardness Test Block HLG
  *other hardness test blocks are available as well.
• Portable grinding machine
• Wireless printer (by request)
• Different colors of rubber bumper protected case
• AA batteries
• Battery chargers
• Transportation plastic case for hardness tester

• Calibration certificate issued by the third-party metrology laboratory (ILAC)
• Certificate of origin issued by the Chamber of Commerce and Industry
• Certificate of Origin and Quality from NOVOTEST
• CE certificate

• Extended warranty period up to 3 years
• Individual modification to customer requirements

STANDARD PACKAGE

“Basic” kit:

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 1pc (10N, 50N or 98N for choice)
• Accessory package:
  – AA batteries – 2 pcs
  – Battery charger
  – USB cable for PC
  – PC software:
  — Online – INFO/USB-connect
  — Offline – NOVOTEST USB-Connect
  – NOVOTEST LAB App for Android gadgets
  – Operating manual/Quick guide
  – Test certificate
  – Transportation plastic case

“Advanced 1” kit: 

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 1pc (10N, 50N or 98N for choice)
• Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
• Accessory package

“Advanced 2” kit: 

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 2pc (50N + 10N or 98N)
• Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
• Accessory package

“Advanced 3” kit: 

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 1pc (10N, 50N or 98N for choice)
• Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
• Device for measuring the hardness of thin sheets NOVOTEST U1-TL
• Accessory package

“Professional” kit:    

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 3pcs (10N, 50N, 98N)
• Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
• Device for measuring the hardness of thin sheets NOVOTEST U1-TL
• Accessory package

“Expert” kit:  

• Electronic unit UCI Hardness Tester NOVOTEST T-U2 (Lab)
• UCI probe – 2pc (50N + 10N or 98N)
• Rockwell Hardness Test Block 25HRC, 45 HRC, 65HRC – 3pcs
• Brinell Hardness Test Block 100HB, 200HB, 400HB or other nominals – 3pcs
• Vickers Hardness Test Block 200HV, 450HV, 800HV or other nominals – 3pcs
• Device for measuring the hardness of thin sheets NOVOTEST U1-TL
• Accessory package

Other configurations of the packages are available as well.